Description requirement | Legal base (Dutch law) |
In addition to SOLAS Chapter II-1, regulation 3-5, the national provisions as laid down in Instruction to ROs no. 24 “Ban on the use of asbestos on board ships” apply to: - All new ships irrespective of size and length, that are:
- being built at a shipyard in the Netherlands;
- being built at a shipyard outside the Netherlands under the requirements of the Netherlands flag and flying the Netherlands flag upon delivery;
- being built at a shipyard outside the Netherlands under the requirements of a flag other than the Netherlands, but flying the Netherlands flag upon delivery;
- All existing ships, irrespective of size and length, that are or will be flying the Netherlands flag.
| SOLAS Chapter II-1, Regulation 3-5 Products Decree Asbestos 2004, Article 4 Policy rule (under development) Instruction to ROs no. 24 |
A cargo ship with a length of 24 meters or more or a passenger ship that has been equipped with a BNWAS on or after 1 July 2009 but before 1 July 2011, shall meet the requirements of IMO resolution MSC.128(75). A BNWAS placed before 1 July 2009 may be exempted from the requirements of IMO resolution MSC.128(75). | Regulation Safety Seagoing Vessels, Article 24.3. Regulation Safety Seagoing Vessels, Article 41a. |
If an acetylene welding and cutting system, consisting of acetylene and oxygen bottles (also medical), including the space for storage, pipelines, hoses and appendages, is positioned on board of a ship, this system shall be periodically examined, well maintained, positioned and arranged such that the risk of fire or explosion for an operating as well as a non-operating system has been minimized. | Regulation Safety Seagoing Vessels, Article 23.6 & 23.8 Policy Rule Safety Seagoing Vessels, Article 5. Instructions to ROs no. 19 |
If an electrical welding set with corresponding equipment is on board of a ship, this equipment shall be periodically examined, well maintained and arranged such that it cannot impose danger to persons or the surrounding area with due regard for the special circumstances on board. | Regulation Safety Seagoing Vessels, Article 23.7 Policy Rule Safety Seagoing Vessels, Article 5 |
The electrical installations on board of a ship should meet the standards in Publication 92 (Electrical Installations on Board of Ships) of the International Electro technical Committee or equivalent standards of a classification society assigned pursuant to article 36 of the Ship Decree 2004. | Regulation Safety Seagoing Vessels, Article 23.1 NSI Circular 34, Rev.1 |
The construction and design and the maintenance of electrical passenger lifts comply with: - the rules of a classification society assigned pursuant to article 36 of the Ships Decree 2004, or:
- the standard issued by the Dutch Standardization Institute in Delft, NEN 28 383.
| Regulation Safety Seagoing Vessels; Article 23.2 |
In addition to provision II-1/42.2, respectively II-1/43.2, of the SOLAS Convention, the electrical emergency power source available on board of a ship is also able to supply power during at least 36 hours, in case of a passenger ship, and at least 18 hours, in case of a cargo ship, for the benefit of emergency lighting in galleys, messes and other rooms for general use. | Regulation Safety Seagoing Vessels, Article 23.3 |
Guidelines for the control and safeguarding of the machinery installation for unattended engine room (SOLAS and non-SOLAS vessels), including communication between navigating bridge and machinery space and Engineer's alarm. | NSI Circular 31 and 34 Regulation Safety seagoing ships Article (tbd) and Policy Rule (under development) Instruction to ROs no.17 |
Several safety related IMO instruments are implemented as policy rule. | Policy Rule Safety Seagoing Vessels |