02 ISM-Code International Safety Management Code - Res. A.741(18)

International Safety Management Code - ISM-CODE

		dd-mm-yyyy = Entry into force
Document	A.741(18)	Entry Into Force: 01-07-1998
Revokes	A.680(17) Not published in ER
Amended by	MSC/Res.104(73)	01-07-2002
Amended by	MSC/Res.179(79)	01-07-2006
Amended by	MSC/Res.195(80)	01-01-2009
Amended by	MSC/Res.273(85)	01-07-2010

International management Code for the safe operation of ships and for pollution prevention

(International Safety Management (ISM) CODE)

THE ASSEMBLY,

RECALLING Article 15(j) of the Convention on the International Maritime Organization concerning the functions of the Assembly in relation to regulations and guidelines concerning maritime safety and the prevention and control of marine pollution from ships,

RECALLING ALSO resolution A.680(17), by which it invited Member Governments to encourage those responsible for the management and operation.of ships to take appropriate steps to develop, implement and assess safety and pollution prevention management in accordance with the IMO Guidelines on management for the safe operation of ships and for pollution prevention,

RECALLING ALSO resolution A.596(15), by which it requested the Maritime Safety Committee to develop, as a matter of urgency, guidelines, wherever relevant, concerning shipboard and shore-based management and its decision to include in the work programme of the Maritime Safety Committee and the Marine Environment Protection Committee an item on shipboard and shore-based management for the safe operation of ships and for the prevention of marine pollution, respectively,

RECALLING FURTHER resolution A.441(XI), by which it invited every State to take the necessary steps to ensure that the owner of a ship which flies the flag of that State provides such State with the current information necessary to enable it to identify and contact the person contracted or otherwise
entrusted by the Owner to discharge his responsibilities for that ship in regard to matters relating to maritime safety and the protection of the marine environment,

RECALLING FURTHER resolution A.443(XI), by which it invited Governments to take the necessary steps to safeguard the shipmaster in the proper discharge of his responsibilities in regard to maritime safety and the protection of the marine environment,

RECOGNIZING the need for appropriate organization of management to enable it to respond to the need of those on board ships to achieve and maintain high standards of safety and environmental protection,

RECOGNIZING ALSO that the most important means of preventing maritime casualties and pollution of the sea from ships is to design, construct, equip and maintain ships and to operate them with properly trained crews in compliance with international conventions and standards relating to maritime safety and pollution prevention,

NOTING that the Maritime Safety Committee is developing requirements for adoption by Contracting Governments to the International Convention for the Safety of Life at Sea (SOLAS), 1974, which will make compliance with the Code referred to in operative paragraph 1 mandatory,

CONSIDERING that the early implementation of that Code would greatly assist in improving safety at sea and protection of the marine environment,

NOTING FURTHER that the Maritime Safety Committee and the Marine Environment Protection Committee have reviewed resolution A.680(17) and the Guidelines annexed thereto in developing the Code,

HAVING CONSIDERED the recommendations made by the Maritime Safety Committee at its sixty-second session and by the Marine Environment Protection Committee at its thirty-fourth session,

1. ADOPTS the International Management Code for the Safe Operation of Ships and for Pollution Prevention (International Safety Management (ISM) Code), set out in the Annex to the present resolution;
   
   
2. STRONGLY URGES Governments to implement the ISM Code on a national basis, giving priority to passenger ships, tankers, gas carriers, bulk carriers and mobile offshore units, which are flying their flags, as soon as possible but not later than 1 June 1998, pending development of the mandatory applications of the Code;
   
   
3. REQUESTS Governments to inform the Maritime Safety Committee and the Marine Environment Protection Committee of the action they have taken in implementing the ISM Code;
   
   
4. REQUESTS the Maritime Safety Committee and the Marine Environment Protection Committee to develop Guidelines for the implementation of the ISM Code;
   
   
5. REQUESTS ALSO the Maritime Safety Committee and the Marine Environment Protection Committee to keep the Code and its associated Guidelines, under review and to amend them as necessary;
   
   
6. REVOKES resolution A.680(17).

Ingangsdatum: 01-07-1998

International Safety Management Code - ISM-CODE

		dd-mm-yyyy = Entry into force
Document	A.741(18)	Entry Into Force: 01-07-1998
Revokes	A.680(17) Not published in ER
Amended by	MSC/Res.104(73)	01-07-2002
Amended by	MSC/Res.179(79)	01-07-2006
Amended by	MSC/Res.195(80)	01-01-2009
Amended by	MSC/Res.273(85)	01-07-2010

International management Code for the safe operation of ships and for pollution prevention

(International Safety Management (ISM) CODE)

THE ASSEMBLY,

RECALLING Article 15(j) of the Convention on the International Maritime Organization concerning the functions of the Assembly in relation to regulations and guidelines concerning maritime safety and the prevention and control of marine pollution from ships,

RECALLING ALSO resolution A.680(17), by which it invited Member Governments to encourage those responsible for the management and operation.of ships to take appropriate steps to develop, implement and assess safety and pollution prevention management in accordance with the IMO Guidelines on management for the safe operation of ships and for pollution prevention,

RECALLING ALSO resolution A.596(15), by which it requested the Maritime Safety Committee to develop, as a matter of urgency, guidelines, wherever relevant, concerning shipboard and shore-based management and its decision to include in the work programme of the Maritime Safety Committee and the Marine Environment Protection Committee an item on shipboard and shore-based management for the safe operation of ships and for the prevention of marine pollution, respectively,

RECALLING FURTHER resolution A.441(XI), by which it invited every State to take the necessary steps to ensure that the owner of a ship which flies the flag of that State provides such State with the current information necessary to enable it to identify and contact the person contracted or otherwise
entrusted by the Owner to discharge his responsibilities for that ship in regard to matters relating to maritime safety and the protection of the marine environment,

RECALLING FURTHER resolution A.443(XI), by which it invited Governments to take the necessary steps to safeguard the shipmaster in the proper discharge of his responsibilities in regard to maritime safety and the protection of the marine environment,

RECOGNIZING the need for appropriate organization of management to enable it to respond to the need of those on board ships to achieve and maintain high standards of safety and environmental protection,

RECOGNIZING ALSO that the most important means of preventing maritime casualties and pollution of the sea from ships is to design, construct, equip and maintain ships and to operate them with properly trained crews in compliance with international conventions and standards relating to maritime safety and pollution prevention,

NOTING that the Maritime Safety Committee is developing requirements for adoption by Contracting Governments to the International Convention for the Safety of Life at Sea (SOLAS), 1974, which will make compliance with the Code referred to in operative paragraph 1 mandatory,

CONSIDERING that the early implementation of that Code would greatly assist in improving safety at sea and protection of the marine environment,

NOTING FURTHER that the Maritime Safety Committee and the Marine Environment Protection Committee have reviewed resolution A.680(17) and the Guidelines annexed thereto in developing the Code,

HAVING CONSIDERED the recommendations made by the Maritime Safety Committee at its sixty-second session and by the Marine Environment Protection Committee at its thirty-fourth session,

1. ADOPTS the International Management Code for the Safe Operation of Ships and for Pollution Prevention (International Safety Management (ISM) Code), set out in the Annex to the present resolution;
   
   
2. STRONGLY URGES Governments to implement the ISM Code on a national basis, giving priority to passenger ships, tankers, gas carriers, bulk carriers and mobile offshore units, which are flying their flags, as soon as possible but not later than 1 June 1998, pending development of the mandatory applications of the Code;
   
   
3. REQUESTS Governments to inform the Maritime Safety Committee and the Marine Environment Protection Committee of the action they have taken in implementing the ISM Code;
   
   
4. REQUESTS the Maritime Safety Committee and the Marine Environment Protection Committee to develop Guidelines for the implementation of the ISM Code;
   
   
5. REQUESTS ALSO the Maritime Safety Committee and the Marine Environment Protection Committee to keep the Code and its associated Guidelines, under review and to amend them as necessary;
   
   
6. REVOKES resolution A.680(17).

Part A Implementation

01 General

1 General

1.1 Definitions

1.1.1 "International Safety Management (ISM) Code" means the International Management Code for the Safe Operation of Ships and for Pollution Prevention as adopted by the Assembly, as may be amended by the Organization.

1.1.2 "Company" means the Owner of the ship or any other organization or person such as the Manager, or the Bareboat Charterer, who has assumed the responsibility for operation of the ship from the Shipowner and who on assuming such responsibility has agreed to take over all the duties and responsibility imposed by the Code.

1.1.3 "Administration" means the Government of the State whose flag the ship is entitled to fly.

 

1.2 Objectives
1.2.1 The objectives of the Code are to ensure safety at sea, prevention of human injury or loss of life, and avoidance of damage to the environment, in particular, to the marine environment, and to property.

1.2.2 Safety management objectives of the Company should, inter alia:

1. provide for safe practices in ship operation and a safe working environment;
   
   
2. establish safeguards against all identified risks; and
   
   
3. continuously improve safety management skills of personnel ashore and aboard ships, including preparing for emergencies related both to safety and environmental protection.
   
   

1.2.3 The safety management system should ensure:

1. compliance with mandatory rules and regulations; and
   
   
2. that applicable codes, guidelines and standards recommended by the Organization, Administrations, classification societies and maritime industry organizations are taken into account.
   
   

1.3 Application
The requirements of this Code may be applied to all ships.

1.4 Functional requirements for a Safety Management System (SMS)
Every Company should develop, implement and maintain a Safety Management System (SMS) which includes the following functional requirements:

1. a safety and environmental protection policy;
   
   
2. instructions and procedures to ensure safe operation of ships and protection of the environment in compliance with relevant international and flag State legislation;
   
   
3. defined levels of authority and lines of communication between, and amongst, shore and shipboard personnel;
   
   
4. procedures for reporting accidents and non-conformities with the provisions of this Code;
   
   
5. procedures to prepare for and respond to emergency situations; and
   
   
6. procedures for internal audits and management reviews

Ingangsdatum: 01-07-1998

Geldig tot en met: 30-06-2002

1 General

1.1 Definitions

1.1.1 "International Safety Management (ISM) Code" means the International Management Code for the Safe Operation of Ships and for Pollution Prevention as adopted by the Assembly, as may be amended by the Organization.

1.1.2 "Company" means the Owner of the ship or any other organization or person such as the Manager, or the Bareboat Charterer, who has assumed the responsibility for operation of the ship from the Shipowner and who on assuming such responsibility has agreed to take over all the duties and responsibility imposed by the Code.

1.1.3 "Administration" means the Government of the State whose flag the ship is entitled to fly.

 

1.2 Objectives
1.2.1 The objectives of the Code are to ensure safety at sea, prevention of human injury or loss of life, and avoidance of damage to the environment, in particular, to the marine environment, and to property.

1.2.2 Safety management objectives of the Company should, inter alia:

1. provide for safe practices in ship operation and a safe working environment;
   
   
2. establish safeguards against all identified risks; and
   
   
3. continuously improve safety management skills of personnel ashore and aboard ships, including preparing for emergencies related both to safety and environmental protection.
   
   

1.2.3 The safety management system should ensure:

1. compliance with mandatory rules and regulations; and
   
   
2. that applicable codes, guidelines and standards recommended by the Organization, Administrations, classification societies and maritime industry organizations are taken into account.
   
   

1.3 Application
The requirements of this Code may be applied to all ships.

1.4 Functional requirements for a Safety Management System (SMS)
Every Company should develop, implement and maintain a Safety Management System (SMS) which includes the following functional requirements:

1. a safety and environmental protection policy;
   
   
2. instructions and procedures to ensure safe operation of ships and protection of the environment in compliance with relevant international and flag State legislation;
   
   
3. defined levels of authority and lines of communication between, and amongst, shore and shipboard personnel;
   
   
4. procedures for reporting accidents and non-conformities with the provisions of this Code;
   
   
5. procedures to prepare for and respond to emergency situations; and
   
   
6. procedures for internal audits and management reviews

02 Safety and environmental protection policy

Ingangsdatum: 01-07-1998

2 Safety and environmental protection policy

2.1 The Company should establish a safety and environmental protection policy which describes how the objectives, given in paragraph 1.2, will be achieved.

2.2 The Company should ensure that the policy is implemented and maintained at all levels of the organization both ship based as well as shore based.

03 Company responsibilities and authority

Ingangsdatum: 01-07-1998

3 Company responsibilities and authority

3.1 If the entity who is responsible for the operation of the ship is other than the owner, the owner must report the full name and details of such entity to the Administration.

3.2 The Company should define and document the responsibility, authority and interrelation of all personnel who manage, perform and verify work relating to and affecting safety and pollution prevention.

3.3 The Company is responsible for ensuring that adequate resources and shore based support are provided to enable the designated person or persons to carry out their functions.

04 Designated person(s)

Ingangsdatum: 01-07-1998

4 Designated person(s)

To ensure the safe operation of each ship and to provide a link between the company and those on board, every company, as appropriate, should designate a person or persons ashore having direct access to the highest level of management. The responsibility and authority of the designated person or persons should include monitoring the safety and pollution prevention aspects of the operation of each ship and to ensure that adequate resources and shore based support are applied, as required.

05 Master's responsibility and authority

5 Master's responsibility and authority

5.1 The Company should clearly define and document the master's responsibility with regard to:

1. implementing the safety and environmental protection policy of the Company;
   
   
2. motivating the crew in the observation of that policy;
   
   
3. issuing appropriate orders and instructions in a clear and simple manner;
   
   
4. verifying that specified requirements are observed; and
   
   
5. reviewing the SMS and reporting its deficiencies to the shore based management.
   
   

5.2 The Company should ensure that the SMS operating on board the ship contains a clear statement emphasizing the Master's authority. The Company should establish in the SMS that the master has the overriding authority and the responsibility to make decisions with respect to safety and pollution prevention and to request the Company's assistance as may be necessary.

Ingangsdatum: 01-07-1998

Geldig tot en met: 30-06-2010

5 Master's responsibility and authority

5.1 The Company should clearly define and document the master's responsibility with regard to:

1. implementing the safety and environmental protection policy of the Company;
   
   
2. motivating the crew in the observation of that policy;
   
   
3. issuing appropriate orders and instructions in a clear and simple manner;
   
   
4. verifying that specified requirements are observed; and
   
   
5. reviewing the SMS and reporting its deficiencies to the shore based management.
   
   

5.2 The Company should ensure that the SMS operating on board the ship contains a clear statement emphasizing the Master's authority. The Company should establish in the SMS that the master has the overriding authority and the responsibility to make decisions with respect to safety and pollution prevention and to request the Company's assistance as may be necessary.

06 Resources and personnel

Ingangsdatum: 01-07-1998

6 Resources and personnel

6.1 The Company should ensure that the master is:

1. properly qualified for command;
   
   
2. fully conversant with the Company's SMS; and
   
   
3. given the necessary support so that the Master's duties can be safely performed.
   
   

6.2 The Company should ensure that each ship is manned with qualified, certificated and medically fit seafarers in accordance with national and international requirements.

6.3 The Company should establish procedures to ensure that new personnel and personnel transferred to new assignments related to safety and protection of the environment are given proper familiarisation with their duties. Instructions which are essential to be provided prior to sailing should be identified, documented and given.

6.4 The Company should ensure that all personnel involved in the Company's SMS have an adequate understanding of relevant rules, regulations, codes and guidelines.

6.5 The Company should establish and maintain procedures for identifying any training which may be required in support of the SMS and ensure that such training is provided for all personnel concerned.

6.6 The Company should establish procedures by which the ship's personnel receive relevant information on the SMS in a working language or languages understood by them.

6.7 The Company should ensure that the ship's personnel are able to communicate effectively in the execution of their duties related to the SMS.

07 Development of plans for shipboard operations

7 - Development of plans for shipboard operations

The Company should establish procedures for the preparation of plans and instructions for koy shipboard operations concerning the safety of the ship and the prevention of pollution. The various tasks involved should be defined and assigned to qualified personnel.

Ingangsdatum: 01-07-1998

Geldig tot en met: 30-06-2010

7 - Development of plans for shipboard operations

The Company should establish procedures for the preparation of plans and instructions for koy shipboard operations concerning the safety of the ship and the prevention of pollution. The various tasks involved should be defined and assigned to qualified personnel.

07 Shipboard operations

[Niet geldig (geldigheid vanaf 2010-07-01)]

08 Emergency prepardness

8 Emergency prepardness

8.1 The Company should establish procedures to identify, describe and respond to potential emergency shipboard situations.

8.2 The Company should establish programmes for drills and exercises to prepare for emergency actions.

8.3 The SMS should provide for measures ensuring that the Company's organization can respond at any time to hazards, accidents and emergency situations involving its ships.

Ingangsdatum: 01-07-1998

Geldig tot en met: 30-06-2010

8 Emergency prepardness

8.1 The Company should establish procedures to identify, describe and respond to potential emergency shipboard situations.

8.2 The Company should establish programmes for drills and exercises to prepare for emergency actions.

8.3 The SMS should provide for measures ensuring that the Company's organization can respond at any time to hazards, accidents and emergency situations involving its ships.

09 Reports and analysis of Non-conformities accidents and hazardous occurences

9 Reports and analysis of Non-Conformities accidents and hazardous occurences

9.1 The SMS should include procedures ensuring that non-conformities, accidents and hazardous situations are reported to the Company, investigated and analyzed with the objective of improving safety and pollution prevention.

9.2 The Company should establish procedures for the implementation of corrective action.

Ingangsdatum: 01-07-1998

Geldig tot en met: 30-06-2010

9 Reports and analysis of Non-Conformities accidents and hazardous occurences

9.1 The SMS should include procedures ensuring that non-conformities, accidents and hazardous situations are reported to the Company, investigated and analyzed with the objective of improving safety and pollution prevention.

9.2 The Company should establish procedures for the implementation of corrective action.

10 Maintenance of the ship and equipment

10 Maintenance of the ship and equipment

10.1 The Company should establish procedures to ensure that the ship is maintained in conformity with the provisions of the relevant rules and regulations and with any additional requirements which may be established by the Company.

10.2 In meeting these requirements the Company should ensure that:

1. inspections are held at appropriate intervals;
   
   
2. any non-conformity is reported with its possible cause, if known;
   
   
3. appropriate corrective action is taken; and
   
   
4. records of these activities are maintained.
   
   

10.3 The Company should establish procedures in SMS to identify equipment and technical systems the sudden operational failure of which may result in hazardous situations. The SMS should provide for specific measures aimed at promoting the reliability of such equipment or systems. These measures should include the regular testing of stand-by arrangements and equipment or technical systems that are not in continuous use.

10.4 The inspections mentioned in 10.2 as well as the measures referred to 10.3 should be integrated in the ship's operational maintenance routine.

Ingangsdatum: 01-07-1998

Geldig tot en met: 30-06-2010

10 Maintenance of the ship and equipment

10.1 The Company should establish procedures to ensure that the ship is maintained in conformity with the provisions of the relevant rules and regulations and with any additional requirements which may be established by the Company.

10.2 In meeting these requirements the Company should ensure that:

1. inspections are held at appropriate intervals;
   
   
2. any non-conformity is reported with its possible cause, if known;
   
   
3. appropriate corrective action is taken; and
   
   
4. records of these activities are maintained.
   
   

10.3 The Company should establish procedures in SMS to identify equipment and technical systems the sudden operational failure of which may result in hazardous situations. The SMS should provide for specific measures aimed at promoting the reliability of such equipment or systems. These measures should include the regular testing of stand-by arrangements and equipment or technical systems that are not in continuous use.

10.4 The inspections mentioned in 10.2 as well as the measures referred to 10.3 should be integrated in the ship's operational maintenance routine.

11 Documentation

Ingangsdatum: 01-07-1998

11 Documentation

11.1 The Company should establish and maintain procedures to control all documents and data which are relevant to the SMS.

11.2 The Company should ensure that:

1. valid documents are available at all relevant locations;
   
   
2. changes to documents are reviewed and approved by authorized personnel; and
   
   
3. obsolete documents are promptly removed.
   
   

11.3 The documents used to describe and implement the SMS may be referred to as the "Safety Management Manual". Documentation should be kept in a form that the Company considers most effective. Each ship should carry on board all documentation relevant to that ship.

12 Company verification review and evaluation

12 Company verification review and evaluation

12.1 The Company should carry out internal safety audits to verify whether safety and pollution prevention activities comply with the SMS.

12.2 The Company should periodically evaluate the efficiency and when needed review the SMS in accordance with procedures established by the Company.

12.3 The audits and possible corrective actions should be carried out in accordance with documented procedures.

12.4 Personnel carrying out audits should be independent of the areas being audited unless this is impracticable due to the size and the nature of the Company.

12.5 The results of the audits and reviews should be brought to the attention of all personnel having responsibility in the area involved.

12.6 The management personnel responsible for the area involved should take timely corrective action on deficiencies found.

Ingangsdatum: 01-07-1998

Geldig tot en met: 30-06-2010

12 Company verification review and evaluation

12.1 The Company should carry out internal safety audits to verify whether safety and pollution prevention activities comply with the SMS.

12.2 The Company should periodically evaluate the efficiency and when needed review the SMS in accordance with procedures established by the Company.

12.3 The audits and possible corrective actions should be carried out in accordance with documented procedures.

12.4 Personnel carrying out audits should be independent of the areas being audited unless this is impracticable due to the size and the nature of the Company.

12.5 The results of the audits and reviews should be brought to the attention of all personnel having responsibility in the area involved.

12.6 The management personnel responsible for the area involved should take timely corrective action on deficiencies found.

Part B Certification and verification

13 Certification and periodical verification

13 Certification and periodical verification

13.1 The ship should be operated by a Company which is issued Document of Compliance relevant to that ship.

13.2 A Document of Compliance should be issued for every Company complying with the requirements of ISM Code by the Administration, by organization recognized by the Administration or by the Government of the country, acting on behalf of the Administration in which the Company had chosen to conduct its business. This document should be accepted as evidence that the Company is capable of complying with the requirements of the Code.

13.3 A copy of such a document should be placed on board in order that the Master, if so asked, may produce it for the verification of the Administration or organizations recognized by it.

13.4 A Certificate, called a Safety Management Certificate, should be issued to a ship by the Administration or organization recognized by the Administration. The Administration should, when issuing the certificate, verify that the Company and its shipboard management operate in accordance with the approved SMS.

13.5 The Administration or an organization recognized by the Administration should periodically verify the proper functioning of the ship's SMS as approved.

Ingangsdatum: 01-07-1998

Geldig tot en met: 30-06-2002

13 Certification and periodical verification

13.1 The ship should be operated by a Company which is issued Document of Compliance relevant to that ship.

13.2 A Document of Compliance should be issued for every Company complying with the requirements of ISM Code by the Administration, by organization recognized by the Administration or by the Government of the country, acting on behalf of the Administration in which the Company had chosen to conduct its business. This document should be accepted as evidence that the Company is capable of complying with the requirements of the Code.

13.3 A copy of such a document should be placed on board in order that the Master, if so asked, may produce it for the verification of the Administration or organizations recognized by it.

13.4 A Certificate, called a Safety Management Certificate, should be issued to a ship by the Administration or organization recognized by the Administration. The Administration should, when issuing the certificate, verify that the Company and its shipboard management operate in accordance with the approved SMS.

13.5 The Administration or an organization recognized by the Administration should periodically verify the proper functioning of the ship's SMS as approved.

14 Interim certification

14 Interim certification

14.1 An Interim Document of Compliance may be issued to facilitate initial implementation of this Code when:

1. a Company is newly established; or
   
   
2. new ship types are to be added to an existing Document of Compliance,
   
   

following verification that the Company has a safety management system that meets the objectives of paragraph 1.2.3 of this Code, provided the Company demonstrates plans to implement a safety management system meeting the full requirements of this Code within the period of validity of the Interim Document of Compliance. Such an Interim Document of Compliance should be issued for a period not exceeding 12 months by the Administration or by an organization recognized by the Administration or, at the request of the Administration, by another Contracting Government. A copy of the Interim Document of Compliance should be placed on board in order that the master of the ship, if so requested, may produce it for verification by the Administration or by an organization recognized by the Administration or for the purposes of the control referred to in regulation IX/6.2 of the Convention. The copy of the document is not required to be authenticated or certified.

14.2 An Interim Safety Management Certificate may be issued:

1. to new ships on delivery;
   
   
2. when a Company takes on responsibility for the operation of a ship which is new to the Company; or
   
   
3. when a ship changes flag.
   Such an Interim Safety Management Certificate should be issued for a period not exceeding 6 months by the Administration or an organization recognized by the Administration or, at the request of the Administration, by another Contracting Government.
   
   

14.3 An Administration or, at the request of the Administration, another Contracting Government may, in special cases, extend the validity of an Interim Safety Management Certificate for a further period which should not exceed 6 months from the date of expiry.

14.4 An Interim Safety Management Certificate may be issued following verification that:

1. the Document of Compliance, or the Interim Document of Compliance, is relevant to the ship concerned;
   
   
2. the safety management system provided by the Company for the ship concerned includes key elements of this Code and has been assessed during the audit for issuance of the Document of Compliance or demonstrated for issuance of the Interim Document of Compliance;
   
   
3. the Company has planned the audit of the ship within three months;
   
   
4. the master and officers are familiar with the safety management system and the planned arrangements for its implementation;
   
   
5. instructions, which have been identified as being essential, are provided prior to sailing; and
   
   
6. relevant information on the safety management system has been given in a working language or languages understood by the ship’s personnel.

15 Verification

[Niet geldig (geldigheid vanaf 2002-07-01)]

16 Forms of certificates

[Niet geldig (geldigheid vanaf 2002-07-01)]

Preamble

Ingangsdatum: 01-07-1998

Preamble

1. The purpose of this Code is to provide an international standard for the safe management and operation of ships and for pollution prevention.
   
   
2. The Assembly adopted resolution A.443(XI) by which it invited all Governments to take the necessary steps to safeguard the shipmaster in the proper discharge of his responsibilities with regard to maritime safety and the protection of the marine environment.
   
   
3. The Assembly also adopted resolution A.680(17) by which it further recognized the need for appropriate organization of management to enable it to respond to the need of those on board ships to achieve and maintain high standards of safety and environmental protection.
   
   
4. Recognizing that no two shipping companies or shipowners are the same, and that ships operate under a wide range of different conditions, the Code is based on general principles and objectives.
   
   
5. The Code is expressed in broad terms so that it can have a widespread application. Clearly, different levels of management, whether shore-based or at sea will require varying levels of knowledge and awareness of the items outlined.
   
   
6. The cornerstone of good safety management is commitment from the top. In matters of safety and pollution prevention it is the commitment, competence, attitudes and motivation of individuals at all levels that determines the end result.

Appendix Form of Documents

1 Document of Compliance

 

DOCUMENT OF COMPLIANCE

 

(Official seal)			(State)
Certificate No.
Issued under the provisions of the INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA, 1974, as amended
Under the authority of the Government of ____________________________________ (name of the State)

by _________________________________________________________________ (person or organization authorized)

Name and address of the Company

________________________________________ ________________________________________ (see paragraph 1.1.2 of the ISM Code)

THIS IS TO CERTIFY THAT the safety management system of the Company has been audited and that it complies with the requirements of the International Management Code for the Safe Operation of Ships and for Pollution Prevention (ISM Code) for the types of ships listed below (delete as appropriate):
				Passenger ship Passenger high-speed craft Cargo high-speed craft Bulk carrier Oil tanker Chemical tanker Gas carrier Mobile offshore drilling unit Other cargo ship

 

This Document of Compliance is valid until .........................................., subject to periodical verification.
Issued at  ...................................................................................................... (Place of issue of the document)
Date of issue   ......................................................................................................
			....................................................................... (Signature of the duly authorized official issuing the document)

(Seal or stamp of the issuing authority, as appropriate)

 

Certificate No.
ENDORSEMENT FOR ANNUAL VERIFICATION
THIS IS TO CERTIFY THAT, at the periodical verification in accordance with regulation IX/6.1 of the Convention and paragraph 13.4 of the ISM Code, the safety management system was found to comply with the requirements of the ISM Code.
1st Annual verification	Signed:	......................................................................................................
		(Signature of authorized official)
	Place:	......................................................................................................
	Date:	......................................................................................................
2nd Annual verification	Signed:	......................................................................................................
		(Signature of authorized official)
	Place:	......................................................................................................
	Date:	......................................................................................................
3rd Annual verification	Signed:	......................................................................................................
		(Signature of authorized official)
	Place:	......................................................................................................
	Date:	......................................................................................................
4th Annual verification	Signed:	......................................................................................................
		(Signature of authorized official)
	Place:	......................................................................................................
	Date:	......................................................................................................

 

2 Safety Management Certificate

 

SAFETY MANAGEMENT CERTIFICATE

 

(Official seal)			(State)
Certificate No.
Issued under the provisions of the INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA, 1974, as amended
Under the authority of the Government of ____________________________________ (name of the State)

by _________________________________________________________________ (person or organization authorized)

Name of ship:			________________________________________
Distinctive number or letters:			________________________________________
Port of registry:			________________________________________
Type of ship1:			________________________________________
Gross tonnage:			________________________________________
IMO Number:			_______________________________________
Name and address of Company:			________________________________________ ________________________________________ (see paragraph 1.1.2 of the ISM Code)

 

THIS IS TO CERTIFY THAT the safety management system of the ship has been audited and that it complies with the requirements of the International Management Code for the Safe Operation of Ships and for Pollution Prevention (ISM Code), following verification that the Document of Compliance for the Company is applicable to this type of ship.
This Safety Management Certificate is valid until ..........................................., subject to periodical verification and the Document of Compliance remaining valid.
Issued at  ...................................................................................................... (Place of issue of the document)
Date of issue   ......................................................................................................
			....................................................................... (Signature of the duly authorized official issuing the certificate)

(Seal or stamp of the issuing authority, as appropriate)

 

Certificate No.
ENDORSEMENT FOR INTERMEDIATE VERIFICATION AND ADDITIONAL VERIFICATION (IF REQUIRED)
THIS IS TO CERTIFY THAT, at the periodical verification in accordance with regulation IX/6.1 of the Convention and paragraph 13.8 of the ISM Code, the safety management system was found to comply with the requirements of the ISM Code.
Intermediate verification (to be completed between the second and third anniversry date)	Signed:	......................................................................................................
		(Signature of authorized official)
	Place:	......................................................................................................
	Date:	......................................................................................................

 

______________________________________________________________________

Additional verification2	Signed:	......................................................................................................
		(Signature of authorized official)
	Place:	......................................................................................................
	Date:	......................................................................................................
Additional verification2	Signed:	......................................................................................................
		(Signature of authorized official)
	Place:	......................................................................................................
	Date:	......................................................................................................
Additional verification2	Signed:	......................................................................................................
		(Signature of authorized official)
	Place:	......................................................................................................
	Date:	......................................................................................................

 

---

¹  Insert the type of ship from among the following: passenger ship; passenger high-speed craft; cargo high-speed craft; bulk carrier; oil tanker; chemical tanker; gas carrier; mobile offshore drilling unit; other cargo ship.

²  If applicable. Reference is made to paragraph 3.2.3 of the Guidelines on Implementation of the International Safety Management (ISM) Code by Administrations (resolution A.788(19)).

3 Interim Document of Compliance

 

INTERIM DOCUMENT OF COMPLIANCE

 

(Official seal)			(State)
Certificate No.
Issued under the provisions of the INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA, 1974, as amended
Under the authority of the Government of ____________________________________ (name of the State)

by _________________________________________________________________ (person or organization authorized)

Name and address of the Company

________________________________________ ________________________________________ (see paragraph 1.1.2 of the ISM Code)

THIS IS TO CERTIFY THAT the safety management system of the Company has been recognized as meeting the objectives of paragraph 1.2.3 of the International Management Code for the Safe Operation of Ships and for Pollution Prevention (ISM Code), for the type(s) of ships listed below (delete as appropriate):
				Passenger ship Passenger high-speed craft Cargo high-speed craft Bulk carrier Oil tanker Chemical tanker Gas carrier Mobile offshore drilling unit Other cargo ship

This Interim Document of Compliance is valid until ..........................................
Issued at  ...................................................................................................... (Place of issue of the document)
Date of issue   ......................................................................................................
			....................................................................... (Signature of the duly authorized official issuing the document)

(Seal or stamp of the issuing authority, as appropriate)

4 Interim Safety Management Certificate

 

SAFETY MANAGEMENT CERTIFICATE

 

(Official seal)			(State)
Certificate No.
Issued under the provisions of the INTERNATIONAL CONVENTION FOR THE SAFETY OF LIFE AT SEA, 1974, as amended
Under the authority of the Government of ____________________________________ (name of the State)

by _________________________________________________________________ (person or organization authorized)

Name of ship:			________________________________________
Distinctive number or letters:			________________________________________
Port of registry:			________________________________________
Type of ship1:			________________________________________
Gross tonnage:			________________________________________
IMO Number:			________________________________________
Name and address of Company:			________________________________________ ________________________________________ (see paragraph 1.1.2 of the ISM Code)

 

THIS IS TO CERTIFY THAT the requirements of paragraph 14.4 of the ISM Code have been met and that the Document of Compliance / Interim Document of Compliance2 of the Company is relevant to this ship.
This Interim Safety Management Certificate is valid until ..........................................., subject to to the Document of Compliance / Interim Document of Compliance2 remaining valid.
Issued at  ...................................................................................................... (Place of issue of the document)
Date of issue   ......................................................................................................
			....................................................................... (Signature of the duly authorized official issuing the certificate)

(Seal or stamp of the issuing authority, as appropriate)

 

Certificate No.
The validity of this Interim Safety Management Certificate is extended to: ...........................................
Date of extension:  ......................................................................................................
			....................................................................... (Signature of the duly authorized official extending the validity)

(Seal or stamp of the issuing authority, as appropriate)

 

---

¹  Insert the type of ship from among the following: passenger ship; passenger high-speed craft; cargo high-speed craft; bulk carrier; oil tanker; chemical tanker; gas carrier; mobile offshore drilling unit; other cargo ship.

²  Delete as appropriate

4 The Interim Safety Management Certificate

[Niet geldig (geldigheid vanaf 2009-01-01)]

• Informatietype: Internationaal
• Documentsoort: Code
• Toegangsrechten: Extern
• Identificatie: PUC_2410_14
• Versie: 1
• Datum beschikbaarheid: 02-11-2010
• Geldigheid van: 01-07-1998
• tot en met: 30-06-2002
• Wijzigingsdatum: 24-11-2016
• Titel: 02 ISM-Code International Safety Management Code - Res. A.741(18)
• Organisatie: International Maritime Organization (IMO)
• Taal: Nederlands
• Onderwerp: Veiligheid / Safety; Milieu / Environment
• Hoofdtaak: Koopvaardij / Merchant Shipping
• Thema: Zeevaart / Seagoing ships / Mandatory Regulations / IMO Instruments (Mandatory) / Codes