Ingangsdatum: 17-11-1983
Geldig tot en met: 22-11-1995
DIVING SYSTEM SAFETY CERTIFICATE(Official seal)Issued In the pursuance of theCODE OF SAFETY FOR DIVING SYSTEMS(Adopted by the IMO Assembly resolution A.536(13))
Name of ship ……………………………………………………………………………………
Official number of ship…………………………………………………………………………
Under the authority of the Government
………………………………………………………………………………………………… (full official designation
of the country)
by……………………………………………………………………………………………… (full official designation
of the competent person or organizationauthorized by the Administration)Distinctive identification
and its location for each main component
(number or other identification)
Date on
which the diving system was certificated for the first time;
…………………………………………………………………………………………………
THIS IS TO CERTIFY;
1. That the above-mentioned system has been duly surveyed
and tested in accordance with the applicable provisions of the Code of
Safety for Diving Systems.
2. That the
survey showed that the design, construction, equipment, fittings,
communication system. arrangements and materials of the system and the
conditions thereof are in all respects satisfactory and that the system
complies with the relevant provisions of the Code.
3. That the diving system is designed and constructed for
a maximum operating depth
of
…………………………………………………………………………………………………
4. That the diving system and its main components are designed in
accordance with the
following limiting operating
parameters
………………………………………………………………………………………………………
………………………………………………………………………………………………………
5. That in accordance with section 1.4, the
provisions of the Code are modified in
respect of the
system in the following manner:
This
certificate is valid until………………………….day of………………………………1
9……
Issued at………………………………………………………………………………………19……
(place of issue of certificate)
The
undersigned declares that he is authorized by the said Government to issue
this
certificate ……………………………
(signature of official issuing
the
certificate and/or seal of
issuing authority)
(seal or stamp of issuing
authority, as appropriate)
SURVEYS
This
is to certify that, at a survey required by section 1.6 of the Code, this
system
was found to comply with the relevant provisions of
the Code
Annual survey
Place…………………………………. Date…………………………………….
Signature and seal of issuing authority
Place…………………………………. Date…………………………………….
Signature and seal of issuing authority
Place…………………………………. Date…………………………………….
Signature and seal of issuing authority
Place…………………………………. Date…………………………………….
Signature and seal of issuing authority
Place…………………………………. Date…………………………………….
Signature and seal of issuing authority
Endorsement for the extension of the Certificate
The diving system fully complies with
the relevant provisions of the Code and this
Certificate
shall in accordance with paragraph 1.6.9 of the Code, be accepted as valid
until
...........................................................
Signed………………………………
(signature of
authorized official)
Place………………………………
Date…………………………………
(seal or stamp of
the Administration, as
appropriate)